10″ x 4.5″ 5 micron Harmsco Pleated Sediment Filter NSF


Quick Summary

  • Harmsco HB-10-5W
  • Washable and re-usable
  • Lower overall operating costs
  • Lower initial pressure drops
  • Reduced maintenance downtime and costs
  • High flow capacity
  • NSF 61 certified. Drinking Water System Components – Health Effects
  • Made in USA


The Harmsco Calypsco Blue pleated sediment filters are our top of the range, NSF 61 certified sediment filter.  Recommended as first line of protection in all our filter kits, it’s fully washable for longer-lasting filtration requirements.

Highly efficient filter cartridges made of pleated Polyester-PlusTM filter media for low-pressure drop, high flow capability, increased contaminant removal, long filter runs, reusability and the lowest cost per litre filtered.


  • Pleated design for more surface area
  • Fully washable and re-usable for lower maintenance costs
  • Engineered media for superior performance
  • Cleanable and re-usable in most applications
  • Thermally bonded ens caps for better sealing
  • FDA approved materials – NSF 61 certified. Drinking Water System Components – Health Effects
  • Made in USA


  • Rainwater and Town water
  • Carbon Block Pre-filtration
  • Reverse Osmosis Pre-filtration
  • Municipal Drinking Water Filtration
  • Commercial/Residential Drinking Water Filtration
  • Desalination Pre-filtration
  • Industrial Water Filtration
  • Cooling Tower Filtration
  • Chill Water Loop Filtration
  • Food & Beverage Filtration
  • Marine/Aquatic Filtration


  • Filter Media : Polyester-PlusTM, Synthetic Fibre
  • Temperature : 60°C
  • Dimensions : 4-1/2″ O.D.
  • Center tubes : Moulded ABS or rigid PVC
  • pH : 3 to 11
  • End Caps : Plastisol (Pliable PVC)


  • Nominal Micron Rating : 5
  • Recommended Flow Rate* (LPM) : 45
  • Length (in) : 10
  • O.D. (in) : 4.5
  • Surface Area : 11,148 cm2


  • PF05-10B
  • 2-19N
  • PL05MP1
  • 5PP10J

Do not use the Harmsco Calypso pleated sediment filter for drinking water with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Filters are designed to fit most standard household and commercial or industrial housings. Performance claims are based on independent lab results and manufacturer’s internal test data. Actual results obtained will vary with various combinations of organic contaminants, changes in pH or other conditions encountered in actual use. All information presented here is based on data believed to be reliable. It is offered for evaluation and verification but is not to be considered a warranty of any kind. Flush new cartridges until water runs clear prior to use.

Change or clean filter at a 10psi pressure differential drop across the array or when the filter shows signs of degradation. 

Download Brochure